M6000 2-way leather creaser Kit - Regad

Made in France by Regad, a French manufacturer of electric tools since 1930, for manual finishing operations in leather goods. 

This complete 2-way edge finishing kit with its 3 interchangeable tips will allow you to achieve beautiful edge finishes, draw fine decorative lines on your leather, and burn the sewing threads.

You will be able to adjust the temperature most suitable for your work using the graduated potentiometer from 1 to 10. This will result in a more or less pronounced marking.

Included in the kit:

- 1 Alimentation 2 voies M6000

- 1 Manche en liège diamètre 22mm 1022T

- 1 Manche en liège diamètre 29mm 1002T

- 1 Filet plat avec guide - Série F - F2 - 1,5mm

- 1 Filet simple plat - Série S - S0,5 - 0,5mm

- 1 pointe conique droite 3mm 122L

- 1 Fiche d'instructions

- 2 Support bois repose manche offert

Power Supply:

- Dimensions : 21,5 cm x 18,5 cm x 8 cm

- Poids : 4,2 kg

- Longueur du câble : 2 m

- PRI 230/240v - 50/60 Hz - 48 Watts

Channel :

- Longueur sans outil : 19 cm

- Longueur de la poignée en liège : 9 cm

- Diamètre : 2,2 cm et 2,9 cm

- Poids : 150 g - 160 g

- Longueur du câble du manche : 1,5 m

The appearance of the filet on the leather depends on several parameters, such as the temperature of the tool, the type of leather, and the speed at which the hot tool passes over the leather. We recommend always conducting tests on leather scraps to adjust the settings.

Usage recommendations: Regularly check that the heating tool is securely tightened onto the handle to prevent the occurrence of oxidation and to avoid creating an electrical fault between the tool and the handle.

Info: The tips may darken more or less after a few uses. Residues from edge dye or other finishing products may also remain stuck to your tools. You can clean them by using polishing paste previously applied to a piece of leather and rubbing the warm tool (TH2 to 4) on it. In case of extreme soiling, extra fine steel wool (000) can be used. Be careful not to touch the electrical resistance part to avoid damaging it.

Possibility of another tip available on request.